SHARS 0-1" Electronic Micrometer Head

Curated from 69 real Reddit conversations

Refreshed on: March 6, 2025

Product Image 1
Product Image 2
Product Image 3
Product Image 4
Product Image 5

SHARS 0-1" Electronic Micrometer Head

Brand: Shars
Price: $47
Snoop Score:
8.0
Sentiment
6.4
Popularity
5.9
Technical
9.2
Buy on Amazon for $47See All Micrometer Heads Reviews
As an Amazon Associate, I earn from qualifying purchases.

Snoop's Take

The SHARS 0-1" Electronic Micrometer Head is a precision measuring tool designed for hobbyists and professionals alike, offering a resolution of 0.00005"/0.001mm. Users have expressed positive sentiments about the micrometer's CR2032 battery preference, with one stating, "the Shars uses a CR2032 which I prefer," and many appreciating its performance in various applications like sprockets and chains. Despite some comparing it unfavorably to higher-end brands, the consensus is that it serves well for budget-conscious users, making it a viable option for those needing reliable measurement tools without breaking the bank.

Not for you? Check out our other rated Micrometer Heads

the Shars uses a CR2032 which I prefer, however, the Shars is most likely made in China while the Mitutoyo is made in Japan.

Positive Feedback

She's cooked bro, every indicator I've pulled apart has died from a snapped shaft on one of the gears.

Negative Feedback
Product
8.0
SHARS 0-1" Electronic Micrometer Head
Buy on Amazon for $47
Industrial Quality Control
9 / 10
Automotive Maintenance
9 / 10
Tool Calibration
9 / 10
Machine Setup and Inspection
9 / 10
See how this compares to all Micrometer Heads

What it does well!

Key strengths users can’t stop talking about.
Preference for CR2032 battery in Shars micrometer
“the Shars uses a CR2032 which I prefer, however, the Shars is most likely made in China while the Mitutoyo is made in Japan.”➕
“Air and water did not work, but sprockets and chain work beautifully!”➕
Good for hobby use
“I had no idea this existed!”➕
“I really like the story comic book that goes with it!”➕
Decent budget measurement tools
“I'm hoping someone out there will have found a solid ringer.”➕
“Shars sells decent budget measurement tools.”➕
Good battery life similar to Mitutoyo
“The big sell point is similar battery life to Mitutoyo, I think 1 year?”➕

Where it needs some work!

Areas to watch—feedback on possible improvements.
Accu-size tools are unreliable and low quality.
“She's cooked bro, every indicator I've pulled apart has died from a snapped shaft on one of the gears.”➕
“Accu-size tools are not worth repairing.”➕
Shars micrometer is perceived as lower quality compared to Mitutoyo
“Comparing Mitutoyo with Shars is nonsensical. They are on opposite ends of the scales of both quality and price.”➕
“I just like common batteries.”➕

Compare On All Talked About Dimensions

Product NameImagePriceScoreCompareSee DetailsBuy Now
KUIDAMOS Digital Micrometer Head 25mm Measuring ToolKUIDAMOS Digital Micrometer Head 25mm Measuring Tool$63
9.8
DetailsBuy
ZIZEV Digital Micrometer Head 0-15mmZIZEV Digital Micrometer Head 0-15mm$51
9.0
DetailsBuy
KIMISS 0.001mm Digital Micrometer HeadKIMISS 0.001mm Digital Micrometer Head$38
8.0
DetailsBuy
Mitutoyo 150-206 Micrometer HeadMitutoyo 150-206 Micrometer Head$87
8.0
DetailsBuy
SHARS 0-1" Electronic Micrometer HeadSHARS 0-1" Electronic Micrometer Head$47
8.0
DetailsBuy
INSIZE 6381-1W Micrometer HeadINSIZE 6381-1W Micrometer Head$47
7.8
DetailsBuy
Mitutoyo 148-501 Micrometer HeadMitutoyo 148-501 Micrometer Head$67
7.8
DetailsBuy
Dasqua 4812-5115 Micrometer HeadDasqua 4812-5115 Micrometer Head$24
7.2
DetailsBuy
Mitutoyo 153-208 Micrometer HeadMitutoyo 153-208 Micrometer Head$164
7.2
DetailsBuy
Mitutoyo 150-191 Micrometer HeadMitutoyo 150-191 Micrometer Head$74
6.6
DetailsBuy
Garosa Micrometer Head 0-13mm Inside MicrometerGarosa Micrometer Head 0-13mm Inside Micrometer$15
6.5
DetailsBuy
Mitutoyo 148-811 Micrometer HeadMitutoyo 148-811 Micrometer Head$91
6.1
DetailsBuy
Fowler 54-220-777-1 Digital Micrometer HeadFowler 54-220-777-1 Digital Micrometer Head$146
5.8
DetailsBuy
Mitutoyo 152-102 Micrometer HeadMitutoyo 152-102 Micrometer Head$106
5.4
DetailsBuy
Mitutoyo 151-272 Micrometer HeadMitutoyo 151-272 Micrometer Head$188
5.4
DetailsBuy
Mitutoyo 148-503 Micrometer HeadMitutoyo 148-503 Micrometer Head$67
5.3
DetailsBuy
Mitutoyo 153-203 Micrometer HeadMitutoyo 153-203 Micrometer Head$85
5.2
DetailsBuy
Homeswitch Micrometer Head Measure Tool 0-13mmHomeswitch Micrometer Head Measure Tool 0-13mm$11
4.5
DetailsBuy
Starrett Micrometer Head with One-Piece SpindleStarrett Micrometer Head with One-Piece Spindle$159
4.5
DetailsBuy
Dasqua 4812-5120 Micrometer HeadDasqua 4812-5120 Micrometer Head$72
4.2
DetailsBuy
Mitutoyo 148-104 Micrometer HeadMitutoyo 148-104 Micrometer Head$74
3.4
DetailsBuy
Homeswitch Ratchet Micrometer Head Measure ToolHomeswitch Ratchet Micrometer Head Measure Tool$16
3.3
DetailsBuy
Starrett Micrometer Head with Lock NutStarrett Micrometer Head with Lock Nut$214
2.8
DetailsBuy
Shars 0-1" Micrometer HeadShars 0-1" Micrometer Head$30
1.9
DetailsBuy

Core Power Plays

The specs and strengths that make it shine.
General discussion about dial bore gauges and measuring tools
“A good middle ground.”➕
Discussion on the suitability of calipers for tight tolerances
“obv they aren't going to be good for especially tight tolerances, but then if you're worried about tight tolerances probably don't use calipers to begin with.”➕

Hidden Hero Hacks

Unexpected tricks and side‑door uses you’ll love.
Discussion on the effectiveness of micro-needling
“For the amount of money I expected it to be designed better, or at least for the serum to be basically magic.”➕
“You have used it twice and expect miracles? LOL”➕
“I love it.”➕
“I guess my question is....did we really get scammed?”➕

Buyer’s Cheat Sheet

What to check before you click ‘Add to Cart.’
Mention of preferences for high-quality brands like Mitutoyo
“Seeing that the mitutoyo is a few hundred thousandths of error vs 9 ten thousandths in the cheaper tool makes me feel better.”➕
Advice to avoid cheap micrometers for career longevity
“If you're making a career out of this, don't cheap out, because you'll have to buy the good set eventually.”➕
“Seriously though, don't cheap out on measuring equipment. You'll regret it.”➕
“If you have to cut corners, go SPI or Fowler.”➕
Mention of brands like Mitutoyo and their pricing
“Yeah I'm checking there right now, I found a set of 3 starrett micrometers but they're metric :-(.”➕

Cautionary Callouts

Know the pitfalls before they catch you off guard.
Concerns over quality control in competing brands
“Starrett heads but their QC seems to have tanked in the last year or so and we scrap almost 3% of our Starrett heads as soon as they're out of the box.”➕
“I always rooted for starret, but they're really not making a great case for themselves.”➕
“Starretts gone by the wayside and are riding the coat tails of their past.”➕
“Probably get a nice new mitutoyo for 3 bills.”➕
Discussion about Mitutoyo's offerings
“I am actually in talks with Mitutoyo right now but they don't make a small 2" range head.”➕
Mention of other brands like Sylvac in the market
“Sylvac. Best on the market.”➕
Discussion about the advantages of Mitutoyo micrometers
“Mitutoyo electronic digi, I loved that mic.”➕
“Mitutoyo digital is definitely the go-to for precision and ease of reading.”➕
“So easy to use and so repeatable.”➕
“They’re the best IMO.”➕
Mention of mechanical micrometers and preferences
“Incredible accuracy if you want to buy a pack to fill your capabilities.”➕
“If it's so bent you can't remove it then you might be SOL.”➕
Discussion about the use of go/no-go limits in micrometers
“go-no go/min-max micrometer.”➕
“It's a pass/fail or go/no go micrometer.”➕
General discussion about Limit Micrometers
“I believe this is solved. It is a Limit Micrometer.”➕
“Used like a snap gage.”➕
Concerns about calibration and tracking for quality control
“In our experience, they are used to quickly determine if parts are within spec.”➕
“What can this micro micrometer scale?”➕
“Clearly, it's to make sure your feeler gauges are correct thickness.”➕
Discussion about the reliability of competing brands
“I’ve seen a few places that say it has a stated error of .0009” which is basically like measuring with a perfect .001” gauge.”➕
“most of what I see from Fowler is a low priced copy of something else, dressed up to look like something better.”➕
Discussion on the reliability of Chinese micrometers
“Get a Chinese set for cheap and save up for a Mitutoyo set.”➕
Concerns about calibration and accuracy when using budget tools
“something can be read 2.000, and be off at 2.500 and more so at 3.000”➕
“If it gives you the right measurement I'd say they're good enough.”➕
Concerns about calibration reliability
“So, are they good? Yes, they hold calibration well and will definitely get the job done.”➕
Concerns over accuracy of 3D printed micrometers
“I 3D Printed a Micrometer [deleted]”➕
“Awesome design study and print, but 3D printed parts are not accurate enough for even a semi decent micrometer.”➕
Discussion on improving accuracy through design modifications
“Very cool project!”➕

You May Also Like

Explore more Categories
Outside Micrometers
Top Outside Micrometers for Precision Industrial Measurement
Top Outside Micrometers for Precision Industrial Measurement
Explore Outside Micrometers